Showing posts with label Troubleshooting. Show all posts
How to Stop a Windows Computer from Freezing How to Stop a Windows Computer from Freezing Windows is probably the most popular operating system on the market. Although popular, it is not perfect. In fact, it could even be called i...
How to Stop a Windows Computer from Freezing

How to Stop a Windows Computer from Freezing

Windows is probably the most popular operating system on the market. Although popular, it is not perfect. In fact, it could even be called infamous; it is known to run slowly, freeze, and crash on users frequently. On good systems this is rare, but when your computer suffers from a lack of maintenance, problems are to be expected.

Stop a Windows Computer from Freezing

Unfortunately most users don't perform routine maintenance on their systems. You don't need to be a computer expert to be able to perform simple maintenance, all it takes is a little of your time.

Steps

1. Run a virus scan. Viruses are usually the culprits behind random errors, freezing, and crashing. How to run a virus scan depends on what anti-virus software you have, but basically you select drive C: and/or other disks (especially hard disks) that you suspect to have a virus, and click a button to activate the scan.

2. Uninstall programs you no longer need. Unnecessary programs may not seem like much, but some of them do run idly in the background, and this takes up memory. To uninstall a program, enter the control panel and click "Add/Remove Programs," select the program you want to uninstall, and click "Change/Remove". You can also insert the installation CD and select uninstall, or look for a file something like "uninstall.exe" in the program files.

3. Close some applications. Do you always minimize programs rather than close them? Don't worry about that picture you have open, it won't go away after you close it. That web browser, just bookmark the page or save the process (saving if you have FireFox). Save what you want to save, and close the windows quickly before you decide you want them open (you should know that to close a program you click the little "x" in the upper right corner of the window, there is a more efficient way of doing this without using the mouse... press ALT+F4 to close the window, ALT+TAB to navigate through open windows).

4. Delete any files you no longer need.
This helps if you do it before defragmenting your disk, since there are fewer files for the defragmenter to move. Select the file(s) you want to delete, and press the "delete" key, or right click and click "delete".

5. Use the scheduled maintenance tool. Under the "accessories" folder in the start menu there is a folder called system tools. Depending on your version of Windows, there is a program with a name along the lines of "Maintenance Schedule Wizard." This program will help schedule disk cleanups, disk defragmentations, and more. They all help with keeping your computer's performance at the optimum. Note that in Windows XP it is called "Task Scheduler".

6. Clean up your registry. Find a registry cleaner or clean it manually. Don't clean it manually if you aren't comfortable changing important system settings. Also try using disk cleanup from the start menu under system tools. This folder can be found in accessories.

7. Defragment your hard disk.
Click START>PROGRAMS>ACCESSORIES>SYSTEM TOOLS>DISK DEFRAGMENTER. Follow the onscreen instructions and choose the C: drive. If you're wondering what this does, think if it this way: When you use your computer, files must be opened on your computer, then closed. When files are moved or deleted, they jump around on the part of the disk physically. Eventually the files are scattered everywhere, and it takes your computer longer to find them. By defragmenting your hard drive, you put all of the files close together again, and it's easier for the computer to find them. Defragmenting your drive may take anywhere from ten minutes to several hours depending on the size of the disk and the number of files.

8. Open up your computer case and dust it out.
Dust can make even the best computers run slowly. Unscrew the screws on the side of the case, remove large pieces of hardware and tie down cables, and start vacuuming out dust. Be careful not to suck in any jumpers, pins, wires, etc. You may find it necessary to start removing hardware to access other hardware. Be sure to dust out the heat sync and other fans. If you don't feel comfortable doing so, contact a tech-savvy friend or simply use an air-can. Don't worry too much, it's large amounts of dust that will cause real problems.
  • While you're in the computer, check the heat sync to see if it is faulty. This can cause any operating system to freeze, especially the higher NT versions of Windows.
  • Although the above suggests a vacuum cleaner to dust out a computer, there is a risk of static discharge. It isn't recommended that you do this if you are uncomfortable. Instead, try using an air duster. For removable fans, take them out and CAREFULLY clean them.

9. Format your disk and reinstall your operating system. Be sure to back up your data, for everything on your hard disk will be deleted.

10. Downgrade to a lower operating system (e.g.: From Windows XP to Windows 2000).
Your computer's specs may be too low to run the operating system at a satisfying level. The minimum requirements are MINIMUM, meaning that if you just meet them, you will just be able to run the operating system. For optimal performance, be sure to have at least the suggested specifications, not the minimum.

11. Consider running a small Linux distro.
Use a search engine to find a distribution of Linux that you think you would feel comfortable. Linux is another operating system, and is open source, meaning it's legally free. If you want an interface similar to the Windows interface, go with a KDE version. Try looking on Linux informative sites such as distrowatch for the most recent versions of Linux and reviews on the downloads.

12. Buy or build another computer.
Maybe not the solution you were looking for, but this is probably the best alternative if your computer fails to function properly after so much work. Remember that computers aren't designed to last a long time, most last about 2 to 5 years before hardware issues start showing up (this is not related to the Windows installation, which will usually last you about six months to a year on low maintenance).
Tips
  • When you want to get rid of a program, don't just delete the shortcut, uninstall it from the control panel. Deleting a shortcut is just that, deleting the quick file that executes the main executable on your desktop rather than directly. Uninstall programs rather than delete shortcuts.
  • Empty your recycle bin at least once a week. Even though the files are in the recycle bin, they take up space and sometimes still run.
  • Consider downloading or buying better maintenance tools. The tools included with Windows are just a start at what you want to do, and they might not be as good as other maintenance tools. If you have the hard disk space, download and install better maintenance tools, and be sure to use them.
  • It may sound silly, but consider using a lower screen resolution. See if it lowers the CPU usage.
  • Run the Desktop Cleanup Wizard. In the higher NT versions of Windows, there is a tool that allows you to clear unused shortcuts from your desktop. Right click on your desktop and go to properties, and find the Desktop Cleanup Wizard.
Warnings
  • Beware of computer viruses online when you make any downloads. Scan zip folders before you extract them, scan executables, scan anything suspicious. Don't go overboard, though.
  • Be careful handling any computer hardware. If you don't feel comfortable handling computer hardware, ask a tech-savvy friend to help you.
How to Fix Msvcp110.dll is Missing From your Computer How to Fix Msvcp110.dll is Missing From your Computer Windows Operating System may show you many different varieties of errors. But .dll errors are the most popular ones. Most of the times Users...
How to Fix Msvcp110.dll is Missing From your Computer

How to Fix Msvcp110.dll is Missing From your Computer

Windows Operating System may show you many different varieties of errors. But .dll errors are the most popular ones. Most of the times Users face .dll errors while installing any program on thier pc, Today we will be discussing how to fix one of the Common error in windows which is Msvcp110.dll is missing from your computer. As said, windows can give you a pop up box displaying this error while you try to install any program.

Fix Msvcp110.dll is Missing

You must have seen an error box just like the above picture few minutes ago and that is why you are here. This Error may pop up even on Startup or Shutdown, As the message says, the .dll file is missing from your computer and hence you are getting this message box appear. But Let me tell you that you are on right place because i will be listing possible ways to fix this error.

Fixing MSVCP110.dll is Missing Error


This Error may be caused due to several reasons, Some of them are:
  1. Registry Problem
  2. Corrupt MSVCP110.dll file
  3. Malware Problem
  4. Hardware Issues

So now that we know the causes, lets move ahead and see how to fix Msvcp110.dll error.

Basic Steps to fix Msvcp110.dll is Missing Error


Step 1: Check your Recycle bin


Make sure you have not accidently deleted msvcp110.dll file. Check your Recycle bin to make sure its not there. If you find it just restore and see if you get the error again.

Step 2: Reinstall the Program


At the time you get this error box, you will see that there it says to try and reinstall the program. So i would suggest you to Try and reinstall the program and see if you get the error box again. This is some basic fix so you must perform this first and then move on to below advance fixes.

Advance Steps to fix Msvcp110.dll is Missing Error


Step 3: Install Visual C++ Redistributable for Visual Studio


Download Visual C++ Redistributable for Visual Studio from the Official Microsoft website. Install it once download. This step will replace the old corrupted msvcp110.dll file in most cases.

You may now go further and try to install the program that was showing you the error. Most of the time this solves the issues for handful of users.

Step 4: System Restore


If you have created System Restore point in your windows PC then this is the right time to Restore your System to Previous Point when your PC was working fine. This is why System restore is a very handy feature in Windows which most of the users fail to use.

Step 5: Registry Cleaner


If any of the above Fixes doesn't solve your problem and you still get Msvcp110.dll is Missing from your Computer Error everytime you try to install the program then this indicates registry issues. I would recommend to Download Regserve The Registry Cleaner. These are important tools and so the good ones are not availabe for free. They will Cost some bucks but will keep your Pc Error Free and will prevent any registry corruption in future.

Step 6: Malware/Virus Scan


I am assuming that by now you must have fixed the error and left. Oh you are still there? Try this, Scan your PC for Virus/Malware. Make sure to do a full scan with your favorite anti virus program. See if your anti-virus shows any issues with your Computer.

Step 7: Re-install Windows


So All the above 6 Steps failed to Solve or Fix your Issue of missing .dll file issue ? You will now want to reinstall Windows to fix this problem. Any Corrupt driver/files/registry will be fixed with reinstallation and must also fix the .dll file is missing problem for you.

Finally if any of the above mentioned Steps helped you to fix the issue then Let me know in the Below Comment box which on really fixed your problem. Any other steps which i am missing here can also be shared in Comments that helped you to fix the error.
How to Fix 0xc00007b Error (All PC Games & Software) on Windows How to Fix 0xc00007b Error (All PC Games & Software) on Windows To repair 0xc00007b error the application was unable to start correctly on Windows 7, Windows 8 and Windows 10, it is necessary to know the ...
How to Fix 0xc00007b Error (All PC Games & Software) on Windows

How to Fix 0xc00007b Error (All PC Games & Software) on Windows

To repair 0xc00007b error the application was unable to start correctly on Windows 7, Windows 8 and Windows 10, it is necessary to know the reasons behind such error first. This type o error generate very complex situation for the user because it irritates them and they cannot operate their PC as previous.

Fix 0xc00007b Error

When user tries to execute application on a windows system then, 0xc000007b error appears suddenly and stop user to execute their tasks. This error mainly generates because of mixing up 32bit environment with 64bit one. It means you have a 32bit application that attempts to load a 64bit dll. Such error may also appear while playing PC games such as watch dogs, outlast, and Dead Island.

This article will provide you complete solution to get rid of error 0xc00007b from all pc games.

Bellow some methods are given apply any one and fix Error Code 0xc000007b of unable to start application correctly error


Solution 1 (.Net Framework)


In lots of cases this error can generate due to .NET framework reasons issues. SO try to re-installing the latest or suitable version of .NET framework. Download and install the .Net framework to fix 0xc000007b error.
After successfully re-installation of the application restart your PC to takes place the executed modifications.


Solution 2 (Run as Administrator)


Some software requires running as an administrator privilege, it could fix error0xc000007b. To execute nay application as an administrator, do the following:
1) Go to the properties of the application by, Right-click the application's shortcut, and then click Properties
2) From the properties dialog box, click on the Compatibility tab.
3) Mark the Run this program as an administrator box, and click on OK

Solution 3 (Updates)


Sometime this problem may appear due to the update problems. Microsoft regularly patches latest discovered holes, adds malware definitions to its Windows Defender and Security Essentials utilities. Through downloading the patches released by Microsoft you can installs the missing drivers and updates the outdated ones like graphic card drivers.

Solution 4 (Install DirectX)


Some software and specially games require DirectX software. Though, your PC comprises a latest version of DirectX. Download & install this from the below link.


Solution 5 (Install Microsoft Visual C++)


Try to install Microsoft Visual C++ because this error message may happen on operating systems when the Microsoft Visual C++ Package is not correctly configured.
Download the 32 bit and 64 bit of Microsoft Visual C++ from the bellow given link:


Follow 3 Simple Steps to Repair PC Instantly

  1. Download & Install PC Repair Tool.
  2. Click Scan button to diagnose the PC.
  3. Click Fix Errors to the fix the issues and you are done.
Note: This powerful tool can increase your performance by 97%
How to Fix Error Code DNS_PROBE_FINISHED_NXDOMAIN How to Fix Error Code DNS_PROBE_FINISHED_NXDOMAIN If you are a Google Chrome User then you might get DNS_PROBE_FINISHED_NXDOMAIN Error any time. In Most Cases Users are facing this error in...
How to Fix Error Code DNS_PROBE_FINISHED_NXDOMAIN

How to Fix Error Code DNS_PROBE_FINISHED_NXDOMAIN

If you are a Google Chrome User then you might get DNS_PROBE_FINISHED_NXDOMAIN Error any time. In Most Cases Users are facing this error in Chrome Browser only, Whilst you can easily access any web page on Mozilla firefox or IE. This error Occurs because DNS lookup Fails When you try and access the Webpage.It is also Important to Keep your Windows PC Clean and Optimized, As said times and times again, Various Errors Occurs because of Corrupt or Unorganized Registry Files and System Files.

Fix Error Code DNS_PROBE_FINISHED_NXDOMAIN

Ok then, Today i will Share Few Methods that can help you to get rid of this Error Code DNS_PROBE_FINISHED_NXDOMAIN easily. Follow the Below Mentioned Steps and you will be good to go.

Flushing the DNS


As This Issue Occurs because of DNS, We will first try to Flush the DNS and see if this helps, Follow these steps:

Step 1: Press Windows Key + R to open up Run dialogue box
Step 2: Type in CMD and press enter to Open up Command Prompt
(Alternativele to to Open Command Prompt you Can Press Windows key + X and click on Command Prompt Admin)
Step 3: You will see Command prompt is now open, Now Simply Type the Below Highlighted Command as it is and press enter netsh winsock reset catalog
Step 4: Once the Above Command is Executed, Now Reboot your PC if you want or try to open the same web page what was showing you the error. There should not be any issue now.

Changing DNS settings


If you are still getting the same error then you will need to do some tweaking in DNS Settings which i will show you in just a bit. First let me tell you that this requires you to Make some Changes in your DNS but these changes seems to work and helps to get rid of of Error Code DNS_PROBE_FINISHED_NXDOMAIN.

Step 1: Right Click on the Network Icon in your Taskbar, then Click on Open Network and Sharing Center.
Step 2: A Window will open up, On the left Pane, Click on Change Adapter Settings.
Step 3: Now you will see all the Network Connection but you will have to identify which is active and connected, It can be LAN or Wireless Connection. You will have to Right Click on the Active Connection and Click on Properties.
Step 4: Now another Window will Pop up there just Click on Internet Protocol Version 4 (TCP/IPv4) and then Click on Properties button under it.
Step 5: Now you will have to Check Use the Following DNS server Addresses Option Where you will input the following Values just as shown in Below Picture.

Preferred DNS Server: 8.8.8.8
Alternate DNS Server: 8.8.4.4

Now Click OK and try if you still get the error in Chrome
Note:You can Uncheck Internet Protocol Version 6 (TCP/IPv6) in Step 4.
These Two Methods Works to Fix Error DNS_PROBE_FINISHED_NXDOMAIN but if you still can't get rid of it then you can try to Reinstall Google Chrome on your Computer.
How to Fix Error Loading Operating System How to Fix Error Loading Operating System Get the fix to the Error loading operating system boot error in Windows XP, Vista, 7, 8 and 10. This error shows when your computer's BI...
How to Fix Error Loading Operating System

How to Fix Error Loading Operating System

Get the fix to the Error loading operating system boot error in Windows XP, Vista, 7, 8 and 10. This error shows when your computer's BIOS doesn't support the capacity of the hard disk where you are installing Windows XP or it's not properly installed.

Fix Error Loading Operating System

Issues with your hard disk drive's partition can also be a major cause. Alternative error messages. There are no other known alternative messages for this boot error, except the Error loading operating system text that appears on your computer's black screen at startup.

Use Easy Recovery Essentials


Easy Recovery Essentials can fix many errors such as this automatically using its built-in Automated Repair option. EasyRE is currently available for Windows XP, Vista, 7 and 8 and can be downloaded and created on any PC.

  1. Download Easy Recovery Essentials. Make sure to note your Windows version (XP, Vista, 7 or 8) before you download EasyRE. This guide can help you identify what version of Windows you have installed.
  2. Burn the image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively.
  3. Boot up your PC from the Easy Recovery Essentials CD or USB you created.
  4. Once EasyRE is running, choose the "Automated Repair" option and click Continue.
  5. After EasyRE scans your computer's drives, identify and select the drive letter for your Windows installation from the list, and then click on the Automated Repair button to begin.
  6. Easy Recovery Essentials will start analyzing the selected drive for problems. EasyRE will test for and attempt to automatically correct errors with the disk, partition, bootsector, filesystem, bootloader, and registry. No intervention is required, as EasyRE's repair is fully automated:
  7. Once the process is complete, EasyRE will report its findings. Click on the Restart button to reboot your PC and test the changes.
  8. The Error loading operating system error should now be fixed as your PC begins to load:

You can download Easy Recovery Essentials from here

Fix Error loading operating system in Windows XP


You can fix this error without a Windows XP installation disc as you don't need to boot into its Recovery Console.

Check your hard drive status in BIOS menu

Your computer may not see the hard drive correctly and can't boot into XP. You can check its status in BIOS (or CMOS Setup), but the step to access it depends on your computer's manufacturer.

Press one of these keys to enter BIOS/CMOS: "DEL" or "F1" or "F2" or "ESC".

Recreate the partitions

If your hard disk is setup correctly, you can recreate the partitions by installing Windows XP again.
The Error loading operating system error is more likely to appear if your partitions were also changed by another system before installing XP, e.g. a Linux distribution.
When you reinstall Windows XP, make sure you delete all partitions and create the partitions you need to install XP.

Update the BIOS

If none of the above fixes works for you, you can try and update your computer's BIOS. When starting up your computer check the messages at boot to determine your motherboard's manufacturer.

Press "Pause" key at boot to pause the loading messages.
You can also check the BIOS version when accessing BIOS Menu/CMOS Setup. Go to Check your hard drive status in BIOS menu above for the available keys to access it.

Fix Error loading operating system in Windows Vista


=> Windows Setup CD/DVD Required!
"Some of the solutions below require the use of the Microsoft Windows setup CD or DVD. If your PC did not come with a Windows installation disc or if you no longer have your Windows setup media, you can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many problems, and can also be used to solve this problem with the directions below."
You can also try the solutions from Windows 7.

Run System Restore from the disc

This solution works if you have System Restore enabled on your Windows Vista.
The steps for restoring your PC with System Restore:
  1. Insert the Windows Vista install disc
  2. Restart your computer and boot from the install disc
  3. Press a key when Press any key to boot from CD or DVD message appears on your screen
  4. Click on Repair your computer after selecting a language, time and keyboard method
  5. Select the drive where you installed Windows (usually C:\)
  6. ClickNext
  7. Select System Restore from the System Recovery Options window
  8. Follow the System Restore instructions to select a restore point
  9. Restore your PC by clicking Finish

Use Startup Repair

  1. Insert your Windows Vista install disc
  2. Restart your computer and boot from the CD
  3. Press any key when you see Press any key to boot from CD or DVD
  4. Click Repair your computer after selecting your language, time and keyboard method
  5. Select the drive of your Windows installation and click Next. The standard drive is usually C:\.
  6. Select Startup Repair and wait for the process to finish.

Fix Error loading operating system in Windows 7


=> Windows Setup CD/DVD Required!
"Some of the solutions below require the use of the Microsoft Windows setup CD or DVD. If your PC did not come with a Windows installation disc or if you no longer have your Windows setup media, you can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many problems, and can also be used to solve this problem with the directions below."

Use bootrec.exe and rebuild the BCD

  1. Insert your Windows 7 install disc
  2. Restart your computer and boot from the CD
  3. Press any key at the Press any key to boot from CD or DVD message
  4. Choose Repair your computer after you select the language, time and keyboard method
  5. Select your Windows installation drive (usually C:\)
  6. Click Next
  7. Select Command Prompt from System Recovery Options
  8. Type the following command and press Enter:
"bootrec" /"rebuildbcd"

*That's all.
How to Fix Error Hal.dll is Missing or Corrupt for Windows How to Fix Error Hal.dll is Missing or Corrupt for Windows Hal.dll is a critical file in all Windows installations, and if it cannot be correctly loaded, Windows fail to start. HAL is short for Hardw...
How to Fix Error Hal.dll is Missing or Corrupt for Windows

How to Fix Error Hal.dll is Missing or Corrupt for Windows

Hal.dll is a critical file in all Windows installations, and if it cannot be correctly loaded, Windows fail to start. HAL is short for Hardware Abstraction Layer and hal.dll is Microsoft's implementation of the HAL concept. Communication between Windows and different hardware platforms is facilitated by hal.dll.

Hal.dll is Missing or Corrupt

Attempting to start your Windows PC running Windows Vista, Windows 7, or Windows 8 presents a Windows Boot Manager error screen similar to the one above.

The Status 0x code and the Info text may differ, but the file in question is always \Windows\system32\hal.dll

Attempting to start your Windows XP PC presents a boot-time error screen similar to the one below:

Windows could not start because the following file is missing or corrupt:
\system32\hal.dll.
Please re-install a copy for the above file.

This error has been known to occur as a result of one or more of the following. This message is particularly misleading because normally the fault does not actually lie with hal.dll:

Cause 1: Invalid BOOT.INI file configuration
Cause 2: BCD configuration is incorrect
Cause 3: The hal.dll file is in fact corrupted or missing

How to Fix Error Hal.dll is Missing or Corrupt for Windows


Windows XP


Repair the boot configuration using the Windows XP Recovery Console
Note : The Windows XP CD is required to perform the following steps
  1. Insert the Windows XP CD into the CD drive and restart the computer.
  2. Press the <Spacebar> when prompted Press any key to boot from CD.
  3. At the Welcome to Setup screen press <R> to start the Recovery Console.
  4. If prompted, select the number corresponding to the Windows installation you want to log into (usually C:\WINDOWS) and press <Enter>.
  5. Enter the Administrator password, if any, and press <Enter>.
  6. At the C:\WINDOWS> prompt, type cd \ and press <Enter>.
    There is one space between cd and \ (the backslash).
  7. Type bootcfg /rebuild and press <Enter>.
    There is one space between bootcfg and / (the slash) and no space between / and rebuild.
  8. When prompted Add installation to boot list? (Yes/No/All), type y, and press <Enter>.
  9. When Enter Load Identifier appears, type one of the following that best describes your operating system and press <Enter>:
    • Windows XP Home Edition for Windows XP Home Edition
    • Windows XP Professional for Windows XP Professional
    • Windows XP Media Center for Windows XP Media Center
  10. When Enter OS Load Options appears, type /NoExecute=OptIn /fastdetect and press <Enter>.
  11. Remove the Windows XP CD from the CD drive.
  12. Type Exit, and press <Enter> to reboot into Windows XP.

Windows Vista, Windows 7 or 8

Note : The Windows Vista, Windows 7 or 8 CD/DVD is required to perform the following steps
  1. Insert your Windows installation DVD into your PC's CD-ROM drive,
  2. Fully power down your PC, and make sure it has fully shut off,
  3. Power up your PC,
  4. Press any key when you see Press any key to boot from CD or DVD..
  5. Click the link titled Repair your computer in the bottom-lefthand corner, after first selecting your language and keyboard options.
  6. Wait for Startup Repair to scan your PC for Windows installations, then select your install from the list it shows.
  7. Choose Startup Repair from the list of available recovery options to begin.
  8. Startup Repair will begin scanning your installation for known issues and will attempt a repair, if possible.
  9. Wait sometime , all completed.
  10.  Remove the Windows CD/DVD.
  11. Reboot your PC.

So this was our guide on How to Fix Error Hal.dll is Missing or Corrupt for Windows, I hope the methods given above helped you.
How to Fix DNS_PROBE_FINISHED_BAD_CONFIG in 3 Ways How to Fix DNS_PROBE_FINISHED_BAD_CONFIG in 3 Ways You can Come across DNS_PROBE_FINISHED_BAD_CONFIG error in Google Chrome, Firefox or any other Browser. The error Stops you from accessing W...
How to Fix DNS_PROBE_FINISHED_BAD_CONFIG in 3 Ways

How to Fix DNS_PROBE_FINISHED_BAD_CONFIG in 3 Ways

You can Come across DNS_PROBE_FINISHED_BAD_CONFIG error in Google Chrome, Firefox or any other Browser. The error Stops you from accessing Web Pages like Facebook, Gmail or Google.com itself. This Error in your Browser Points out that DNS lookup Failed while loading the webpage for you.

DNS_PROBE_FINISHED_BAD_CONFIG

It doesn't matter which Windows Version you are using, This is a Internet Connection Error and is displayed in Browser. This Bad_Config Error is gaining Popularity in recent times as more and more people are getting it. But Today We will Show you 3 Ways to Fix DNS_PROBE_FINISHED_BAD_CONFIG error.

Fixing DNS_PROBE_FINISHED_BAD_CONFIG Error


So in this post i will be Sharing 3 different ways to Solve this issue. After Which you will be able to Surf Internet and Open Sites easily just like before. Below Methods are sorted by Basic To Advance.

Method 1: Release/Renew Ip Address.


In this Method, you will be releasing your ip address and then renewing it again. If the Problem is with your IP address then this method should work for you. Just Follow the Below Simple Steps.

Step 1: Open Command Prompt(cmd) By Pressing Combination of Windows key + R to open run. Now type in cmd and Hit Enter.

Alternatively, you can Press Windows Key + X , then Click on Command Prompt (Admin).

Step 2: Now that your Command Prompt is ready, Type in ipconfig /release then hit enter.

Step 3: Now again type in ipconfig /renew and hit enter. This will Renew your IP address.

Step 4: Close the Command Prompt and open your Favorite Browser to Check if the Problem is solved.

Method 2: Flushing DNS.


In This Method We will Be Flushing DNS to Solve Error Code: DNS_PROBE_FINISHED_BAD_CONFIG. This will Most Probably Solve the issue if the Problem is in your DNS Cache. Follow below Steps.

  • First of all Open Command prompt.
  • No type in ipconfig /flushdns without Quotes and hit Enter.
  • You can see your dns is succuessfully Flushed.
  • Open your Browser and see if the issue is still there or you have now fixed it.

Alternatively instead of ipconfig /flushdns you can also type netsh winsock reset catalog and see if that works. Move on to the Next and Final Method if this doesn't help.

Method 3: Tweaking DNS Settings.


  1. If both of the above method didn't helped you to fix DNS_PROBE_FINISHED_BAD_CONFIG error then Use this method. It Requires you to do minor Tweaking in your DNS Settings But In most cases this fixes the issue if done correctly. Follow the below Explained Steps.
  2. Right Click on Network icon in taskbar then click on Open Network and Sharing Center.
  3. Now from the Left pane, find and Click Change Adapter Settings. This will Open up Network Connections.
  4. You will be presented with a new window with all Network Connections, Right Click on Active Connection and select Properties.
  5. Now look for Internet Protocol Version 4 (TCP/IPv4), Double Click on it to open its Properties.
  6. In the Properties Window, Click on Use the Following DNS Server Addresses and Type in 8.8.8.8 in Preferred DNS Server and 8.8.4.4  in Alternate DNS Server. Then Click on OK.

Now Open your Browser and you will see that you have successfully Fixed Error Code DNS_PROBE_FINISHED_BAD_CONFIG now.

If any of the above method helped you, then take a second to let us know int he Comments below.
How to Fix msvcr80.dll is Missing Error How to Fix msvcr80.dll is Missing Error More and more people are facing Msvcr80.dll is missing error in their PC running windows Operatin System. Basically this error is faced by W...
How to Fix msvcr80.dll is Missing Error

How to Fix msvcr80.dll is Missing Error

More and more people are facing Msvcr80.dll is missing error in their PC running windows Operatin System. Basically this error is faced by Windows Users who runs itunes on their PC. In Recent times Many People are getting this Error in itunes and so I am writing this article to fix it. Not only Msvcr8.dll is missing error but Error 0x80070057 is also in demand now a days.

Fix msvcr80.dll is Missing Error

Users are experiencing this error in recent times in high quantity, if you are using itunes, bonjour or any other apple program then, even you may get this error while running these programs

This error maybe caused because of any of the following reasons :
  • Some virus or malware infection in your C drive
  • You might have accidently deleted msvcr80.dll file from you system
  • Your msvcr80.dll may got corrupt due to malfunctioning
  • Registry problems of your system

Fix msvcr80.dll is missing Error


Now that you know the causes of msvcr80.dll is missing error , next time you can be prepared with precautions but what to do with the error which already has took place? Well, you will find the solution here, No! Downloading the missing .dll files from websites online is a bad idea to fix these kinds of errors because these new DLL files may contain malwares which can harm your system even more.

Simple steps to fix msvcr80.dll is missing Error :


Step 1) You will have to uninstall and reinstall all the apple softwares installed in your computer in this order :
  1. Uninstall iTunes
  2. Uninstall Apple software update
  3. Uninstall Apple mobile device support
  4. Uninstall Bonjour
  5. Uninstall Apple application support
  6. Uninstall iCloud

Uninstall all these above programs first if you have installed them already.

Removal of these softwares will not lead to any deletion of your songs or playlists in iTunes so don't worry about that but if you want you can take a backup of these files before uninstalling process. These are usually located in My Music folder in windows.

Step 2) After uninstalling all of above listed programs, you can now Restart your computer. In case , any of above program was unable to get uninstalled properly and generated some error , you can remove it manually from your C drive/Program files/*Program name*

Step 3) Use any registry booster or registry cleaner to make your system's registry clean before reinstalling the softwares so that no previous entries remain in registry.

You may check my article where i shared 3 tools to Uninstall any Program Completely, Including registry of that program.

Step 4) Now you are all set to Reinstall apple softwares. Download the latest version and install one by one.

Right click on downloaded file and select Run As Administrator, Now you may not see any error and you can now Enjoy Error free and latest version of Apple softwares.

I hope this method will help you to get rid of msvcr80.dll is missing error. If you face some problem in performing any of the steps mentioned above feel free to ask for support by leaving your comment below.
What is Runtime Error r6034 and How to Fix It What is Runtime Error r6034 and How to Fix It I've been using Picasa 3.9.137 for Windows 7 for several years without mishap until a week ago, when my once reliable PC suddenly malfun...
What is Runtime Error r6034 and How to Fix It

What is Runtime Error r6034 and How to Fix It

I've been using Picasa 3.9.137 for Windows 7 for several years without mishap until a week ago, when my once reliable PC suddenly malfunctioned.

When it started up or Windows rebooted, my PC showed an error message on its screen. Titled Microsoft Visual C++ Library, the message shows Runtime Error r6034, and informed me that an application had failed to load the C runtime library correctly.

An application has made an attempt to load the C runtime library incorrectly. Please contact the applications support team for more information.

I uninstalled and reinstalled Picasa but doing so did nothing that could help me with correcting the error, so I searched online for how to fix my problem. I refused to throw away my beloved PC just yet.

Runtime Error r6034

Luckily, after looking feverishly for several minutes for a way to fix my computer, I not only learned what this errror r6034 is but also how to fix it.You could only imagine the stress I felt while looking for a way to fix my computer.

How could I work while my PC was broken?


I believe such a misfortune shouldn't happen to anybody,In my case it was Picasa but you may face this error with any XYZ Application. so here's what I learned about this Error.

What is Runtime Error r6034?


Believe it or not, it is a common kind of computer error.
As I've described it already, this computer error

The issues that can cause this error  are: Appears on the screen as a message box. It informs the user of the error and that gives him a definition of what the error is.

In other words, it tells the user that an error has occurred and describes it to him.
  • Software issues
  • Application conflicts
  • Memory usage faculty
  • Conflicts between the Terminate and Stay Resident programs

How Do I Fix a Runtime Error r6034?


There are several ways of fixing this troublesome error, and they are all relatively easy to learn.

Here are the do-it-yourself (DIY) ways:
  • Run a Full Registry scan, Use third Party Software to do it and repair registry
  • Disable all the Startup applications
  • Rename all the dynamic link library (DLL) files on your computer
  • Re-install Picasa or iTunes or any XYZ program and other related programs
  • Start your system in safe mode.

Here are the ways where you would need help or that would require you to use certain software:
  • Use a reputable antivirus software tool to remove any viruses that might have infected your computer
  • Repair your registry entries.

Maintaining your computer isn't rocket science. It requires only time and your patience. While you might find learning things about your computer, like what is a runtime error r6034 and how to fix it, a hassle, knowing them might just determine how your precious computer could last. With no one there to help you and no idea how to deal with it, what are you going to do when, for example, the dreaded blue screen of death appears on the screen?
How to Fix the Blue Screen of Death on Windows How to Fix the Blue Screen of Death on Windows A Blue Screen Error or STOP error, also known as the Blue Screen of Death (BSOD), can be a frustrating experience. The error message almost ...
How to Fix the Blue Screen of Death on Windows

How to Fix the Blue Screen of Death on Windows

A Blue Screen Error or STOP error, also known as the Blue Screen of Death (BSOD), can be a frustrating experience. The error message almost never clearly states what is wrong, and they seem to strike at random. Follow this guide to diagnose and fix the errors causing the Blue Screen of Death.

Windows 8 Blue Screen of Death

Reasons for the occurrence of Blue Screen Error
  • Hardware Failure In the System
  • Using Old Version of Drivers
  • If the System is affected by Virus
  • Failure of RAM and Power Supply Problems

Fix Blue Screen of Death


1) In most of the cases the problem occurs only because of the Drivers, so first update your Windows Operating System Drivers.

Download a software called SlimDrivers Which automatically detects the drivers and update them.

2) Install Best Antivirus and Scan the entire system.

My suggestion is to Download Free Avast antivirus and Configure the Boot Scan.

3) Check whether the RAM is Working or Not, Remove the RAM Clean it and Fix it properly in its slot.

Use RAM Optimizer Software which Boosts the system performance.

4) Check whether there are any loose connections in the cabinet. If necessary open the cabinet clean it.

5) Run Disk Defragmenter and Error Checking on your Hard Drive.

6) Download the below mentioned Cleaning Softwares and Run them on your computer.


7) Finally Restart your system and Run it in Safe Mode.

To Run your PC in Safe Mode press F8 button at the time of booting.
Backup your data to an external drive in Safe Mode before restoring last known good configuration or running repair diagnostics.
For more Troubleshooting Options Refer Below Link
Blue Screen Error Windows

So this was our guide on How to Fix the Blue Screen of Death on Windows xp, vista, 7 or 8 , I hope the methods given above helped you.
How to Fix a PC Which Won't Boot How to Fix a PC Which Won't Boot Computers are the way of the world . But there is nothing more annoying than a broken PC. PC's breakdown from time to time, it happens...
How to Fix a PC Which Won't Boot

How to Fix a PC Which Won't Boot

Computers are the way of the world. But there is nothing more annoying than a broken PC. PC's breakdown from time to time, it happens. This is a guide to repair a desktop computer that won't start up.

Fix a PC Which Won Boot

Step 1 :- First of all you have to determine the cause. Constantly restart the PC in order to confirm that it won't boot. Next you should try the PC on it's side to eliminate a connection error. This could either be a burnt out or worn contact or simply a connection which has come loose. After this you can start the process of fixing the problem..

Step 2 :- There are a couple of problems that will cause a computer not to boot these are: Corrupted BIOS, Corrupted Start up files, corrupted hard drive (containing startup files) or a broken motherboard.

Step 3 :- If absolutely nothing happens when you press the power switch:
  • Check that it is plugged in and switched on both at the wall and at the back of the base unit, check that the wall socket has power.
  • Check the power supply by removing it and testing it in another machine, if it works fine in another machine, check your power switch connections.
  • Check the fuse in the power supply; typically if it is blown, blackened, or the little thread inside is interrupted, when held against a light.
  • If the connections are fine it is likely that your motherboard has died.

Step 4 :- Check for a faulty Motherboard
  • Remove every connection and component from your motherboard except for the power, front panel, CPU assembly, RAM and graphics card, switch it on.
  • If you have more than one stick of RAM test them one at a time.
  • If this works then reconnect your other devices (Switch it off first!) one by one until you find out which one is causing the problem.
  • If your hear sounds of the disk starting, but nothing ever happens on the screen, the BIOS might be corrupted. That can happen when you try to flash it with a newer version, or if an ugly virus flashes it with garbage. If so, the BIOS needs to be reloaded correctly, or the chip replaced. Note: Not all computers have their BIOS in a flashable EPROM, so this might or might not apply.
  • If the board makes a sequence of loud beeps, there is a hardware error in one of the basic components. Two beeps mean 'no monitor found', four beeps 'no memory found', etc. (that list is not for sure). It is the BIOS reporting that it misses an elementary part to continue. Find out which part is broken (or really missing), and replace it.

Step 5 :- Replace the Boot Sector
  • Place windows installer disc into drive.
  • When prompted, press R to start the recovery console.
  • When asked which system you want to log into press 1, then enter.
  • You should now have a C:\WINDOWS\ prompt, type FIXBOOT, then press enter.
  • Type FIXMBR and press enter (that means 'FIX the Master Boot Record' = FIXMBR).
  • Reboot the machine, if it works, you are done.

Step 6 :- Check your BIOS settings
  • To enter the BIOS menu you must tap a certain key as soon as you switch on the PC, this is usually DEL or F2 but it will say on screen, e.g. 'PRESS DEL FOR SETUP'
  • All BIOS menus differ, what you are looking for is a bit called Primary Master, which should have some numbers after it, if it does, then your drive is not at fault, move on.
  • If Primary Master has no information after it your hard drive is not being detected, if you are able, change the setting next to Primary Master so that it says 'Auto'.
  • Save and exit the BIOS, if your computer boots, stop here.
  • If your hard drive is not detected this time you will need to open up the case and check the connections.

Step 7 :- Check for a faulty hard drive
  • Remove your hard drive and put it in another PC if possible.
  • If it does not work in another PC then it is dead, buy a new one.
  • If it does work in another PC, try using different cables.
  • If different cables make no difference your motherboard may be faulty.

Step 8 :- Another reason why pcs often do not start is that people accidentally remove their drives on the computer when safely removing usb's and other hardware devices..!!
How to Fix Template-Skin Only Available For Templates Version 2 and Above on Blogger How to Fix Template-Skin Only Available For Templates Version 2 and Above on Blogger According to my knowledge you adding custom template-skin to your blogger layout or may you have removed some code or you might have remove ...
How to Fix Template-Skin Only Available For Templates Version 2 and Above on Blogger

How to Fix Template-Skin Only Available For Templates Version 2 and Above on Blogger

According to my knowledge you adding custom template-skin to your blogger layout or may you have removed some code or you might have remove this code to setup Facebook comments for blogger. When my friend have this issue ask me to help with this issue and I started too. Comparing other default template and this template but not found the error about hardly trying of 6 hours.

Fix version 2 blogger template skin

Almost compared all section of blogger but found nothing, which was more frustrating at that time. At last I found this issue in the starting point of the code, sometimes solution is in front of you but we does not look at it.

How to solve this error


Step 1: Go to Blogger Dashboard >> Template >> Edit HTML
On the first block of code you must find something like this:
<html expr:dir='data:blog.languageDirection' 
xmlns='http://www.w3.org/1999/xhtml' 
xmlns:b='http://www.google.com/2005/gml/b' 
xmlns:data='http://www.google.com/2005/gml/data' 
xmlns:expr='http://www.google.com/2005/gml/expr'>
Step 2: Just replace above code with this
<html b:version='2' class='v2' 
expr:dir='data:blog.languageDirection' 
xmlns='http://www.w3.org/1999/xhtml' 
xmlns:b='http://www.google.com/2005/gml/b' 
xmlns:data='http://www.google.com/2005/gml/data' 
xmlns:expr='http://www.google.com/2005/gml/expr'>
Now you are good to go Hurray!

So this was our guide on How to Fix template-skin only available for templates version 2 and above on Blogger , I hope the methods given above helped you.
How to Fix a Slow Windows 7 Computer How to Fix a Slow Windows 7 Computer Most people love using Windows 7. That’s because it’s by far the nicest and the most productive Microsoft operating system to date. But ther...
How to Fix a Slow Windows 7 Computer

How to Fix a Slow Windows 7 Computer

Most people love using Windows 7. That’s because it’s by far the nicest and the most productive Microsoft operating system to date. But there can still be glitches, errors, and lags.

Fix a Slow Windows 7 pc

The good thing about Windows 7 is that it has lots of tools to troubleshoot and repair a slow computer. Here is a guide to where to find them and how to use them.

1. Problem Steps Recorder

Problem Steps Recorder is a great solution to get a detailed description of the problem, so that you can either review the report yourself or send it to a tech support team. Basically, this tool records everything happening on the computer that needs troubleshooting. It records all mouse clicks and everything that is pressed on the keyboard, takes screenshots, and then saves the report as a zipped MHTML file. This file can be easily emailed and analyzed. To enable Problem Steps Recorder, click on Start, type PSR and hit Enter. Then click on Start Record. To save a report, just stop recording your computer activity.

2. Troubleshoot problems

If something in Windows 7 starts behaving in a weird way and you have no idea why, go to the Control Panel, locate the “Find and fix problems” (Troubleshooting) option and you’ll be able to access the Windows 7 troubleshooting tools. They are easy-to-use wizards and can fix common problems, clean your system, check your settings, and lots more.

3. Discover bottlenecks

Under normal circumstances, Windows 7 easily outperforms Vista and XP. Nevertheless, your computer can still seem too slow from time to time. Most likely it’s an application or a process that’s slowing you down. Windows 7 makes it really easy to find bottlenecks with the help of Resource Monitor. Just click on Start, type RESMON and hit Enter to launch the tool. When it opens, click on the CPU, Memory, Disk and Network tabs to see which processes are hogging your system and using up your bandwidth. When you find the process that’s holding you back, you’ll be able to try to fix it right from the Resource Monitor. For example, if a process is locked up, right-click on it and select Analyze to see where the problem lies.

4. Repair your computer

If something goes seriously wrong and Windows 7 fails to start, it might be possible to repair your computer without the installation CD. Just boot your PC and press F8 during startup. You should see an option called Repair Your Computer. Select it and press Enter to see the recovery options Windows 7 has to offer.
These Windows 7 tools will help you troubleshoot and fix a slow computer in a quick and easy way. To prevent your computer from slowing down, use maintenance utilities like disk cleanup and defrag to keep your PC in top shape.
How to Uninstall Programs Easily With These Third-Party Uninstallers How to Uninstall Programs Easily With These Third-Party Uninstallers In Windows One Can not Just Click on Delete to Uninstall a program in Windows, you have to run the Software Uninstaller or you Can do it wi...
How to Uninstall Programs Easily With These Third-Party Uninstallers

How to Uninstall Programs Easily With These Third-Party Uninstallers

In Windows One Can not Just Click on Delete to Uninstall a program in Windows, you have to run the Software Uninstaller or you Can do it with Control Panel. Many a times People Find it Difficult to uninstall a Specific program. You might not be aware of the Fact that Uninstalling Programs through Control panel does not always uninstall it Completely. Traces are still left in Registry and Program Files folder.

Third-Party Uninstallers

To Overcome this Problem and Uninstall Programs once and for all, you need to use third party Uninstallers. I will Mention 3 best Uninstallers which will help you to uninstall any program completely and easily including the registry entries. These uninstallers also comes with additional features such as Batch Uninstall, Program Sorting which makes them much easier to use.

3 Third-Party uninstallers to Uninstall Programs in Windows


1) Iobit Uninstaller 3: Iobit Unisntaller is my Preferred Program to Uninstall Applications from my PC without keeping any Leftovers. Iobit uninstaller 3 is Free to use and  Comes with beautiful and user Friendly Interface, Big advantage of Iobit Uninstaller 3 is the fact that it is Portable and Light. which means you don't need to Install this Program and can Carry it anywhere you want.

Iobit uninstaller 3 Also Creates System Restore Point for you , It shows you the list of Programs that has been Installed on your Windows so that you Can easily Uninstall them, or Can even Batch Uninstall Programs to Speedup the Process.


2) Comodo Program Manager: Comodo Program manager is another Program to Uninstall Programs from Windows Easily. Besides Uninstalling Programs, Comodo Program Manager Comes with Many more Usefull Features. its is Simple to use as it comes with User friendly interface. this Program also helps you to remove Drivers, services and Windows Updates.

Comodo Program Manager Is alwasy Active and running in the Background, So whenever you try to run a setup , it checks for Malwares using thier Cloud Technology. Only Disadvantage i Find with this Program is it may use Fair amount of your Computer resource as it is always Actively running in Background.


3) Revo Uninstaller: Revo Uninstaller is one of the Popular Third-Party software that is Used by many to Uninstall Programs.Revo uninstaller is Fast and reliable,you can uninstall single and multiple Programs easily and fast.

It is not Available to download for Free from thier official site but you can enjoy all the features by downloading 30 days free trial pack. You may think of Purchasing if none of the above two programs Interests you Which are Free and much Better.

How to Fix IDM Download Problems With Some Other Specific Sites How to Fix IDM Download Problems With Some Other Specific Sites I Gonna Show You How You Can Solve the Problem When Internet Download Manager Gives Error When You Download From Youtube or Somewhere. T...
How to Fix IDM Download Problems With Some Other Specific Sites

How to Fix IDM Download Problems With Some Other Specific Sites

I Gonna Show You How You Can Solve the Problem When Internet Download Manager Gives Error When You Download From Youtube or Somewhere.

Fix IDM Download Problems With Some Other Specific Sites

This is The Source Link You Can Visit Here

1) Please make sure that you have installed the latest version of IDM.

2) Some sites/servers do not allow requesting the same file twice. The browser made the first request of the file and then when IDM tried to request the same file again, the site sent a web page to IDM instead of the download. That is the reason for the error message.

To download from such sites try to enable "Start downloading immediately while displaying ..." option in "Options->Downloads" dialog (if it is disabled)

3) If it does not help, you can set a special key in "IDM Options->General->Keys...". Press and hold this key while clicking on a download link/button so that IDM could take over the download before the first browser request. Note that "Ins" key should work for most browsers.

So this was our guide on IDM Download Problems With Some Other Specific Sites, I hope the methods given above helped you in Downloading With Some Other Specific Sites.
How to Restore DLL Files on Your Computer How to Restore DLL Files on Your Computer DLL, Dynamic Link Library files are the executable files developed by Microsoft Corporation. These files are similar to EXE files but contai...
How to Restore DLL Files on Your Computer

How to Restore DLL Files on Your Computer

DLL, Dynamic Link Library files are the executable files developed by Microsoft Corporation. These files are similar to EXE files but contain certain codes, data and resources required to support shared library concept on various operating systems and it is used by many applications. These library files are saved with .dll file extension and sometimes with .ocx and .drv extensions. Dealing with these files is not easy. If any DLL file is missing or lost, then certain applications stop working and results in troublesome situations.

Fix Dll Error

Some of the most frequently occurring DLL file errors are run.dll, shell32.dll, system32.dllwmp.dll, kernell32.dll, rundll32.dll, xvid.dll, iframe.dll, kernel.dll and many more. These DLL files are mostly removed unintentionally. This generally happens while uninstalling a program; it may also so happen that there might be an occurrence of error because of any virus infecting the computer system. One need not worry when such a thing occurs as there are many ways in which this error can be repaired.

Installing software in addition to the operating system may overwrite shared system files such as dynamic link libraries (.dll files) and executable files (.exe files)", for MS Windows.

How to Restore DLL Files on PC


1. Missing DLL files that somehow disappear can cause your computer to act in strange ways, such as not shutting down properly.
Run a system disk scan in the Norton Antivirus suite. For instance Norton has a tool called "Windoctor" that makes repairs automatically. It is suggested that if you remove Norton for another free antivirus program, they retain Norton Utilities/ WinDoctor and Speed Disk for defragging.

2. Always run a scan on anything you download before you open it.
Remove programs that you don't use or need. Too many programs clog up the machine. Do periodic defragging. Anytime you download or remove programs, music, etc. plus the normal creation of files, it fragments the computer and slows and confuses its proper functions. "When system files are overwritten, such as .sys, .dll, .ocx, .ttf, .fon, and .exe files, system performance becomes unpredictable, programs behave erratically, and the operating system fails".

3. If it is determined that if you have one or more missing DLL files, that can be identified, and they can be replaced.
Find on Google, a site that offers free DLL file download websites. Download and unzip the file to the desktop. For this you need Winzip or WinRAR to extract the file.

4. Now you need to put the DLL file in the proper folder or subfolders in which the program's files are kept.
A way to find the program from which the DLL file is missing is by entering it into Google.

5. q_encutl.dll+program'. Take for example the message may be posted by 'Norton Windoctor': "C:\Program Files\Common Files\InstallShield\Professional\RunTime\0701\

6. Intel32\DotNetInstaller.exe" cannot access a necessary file, "mscoree.dll." Download the file mscoree.dll.

7. By using 'Windows Explorer', you would in this case go to Local Disk [C] Program Files/Common Files/InstallShield/ and look through the subfolders until you find, in this case Professional/Run Time/Intel32.
In this case you cut and paste or copy the DLL into that folder. By copying instead of cut and paste, you can put the DLL download into your Documents folder as an extra copy.
Tips
  • If you don't have an unzip software you can find a free one at click Here
  • Sometimes software comes with .dll files included, so installing it may also fix other programs.
Warnings
  • If it still doesn't work maybe you need to move the .dll file to another sub folder.
So this was our guide on How to Restore DLL Files on Your Computer, I hope the methods given above helped you.
How to Speed Up a Slow Windows 10, 8, 8.1, 7 or XP Computer How to Speed Up a Slow Windows 10, 8, 8.1, 7 or XP Computer Having a slow computer is not something most users fancy, but that is what most of us end up with after prolonged usage despite having the l...
How to Speed Up a Slow Windows 10, 8, 8.1, 7 or XP Computer

How to Speed Up a Slow Windows 10, 8, 8.1, 7 or XP Computer

Having a slow computer is not something most users fancy, but that is what most of us end up with after prolonged usage despite having the latest hardware. Understandably, there are also a few of us who are trapped with a low-end PC and are forced to get as much out of it as possible.

Increase computer speed

This article caters to both these type of users as it not only explains how to make your computer as fast as it was when new but also how to reduce the footprint of your system to utilize your PC's current system resources in the best possible way.


First thing first. Make sure your PC isn't infected by a virus, worm or other malware


Anyone who has used an infected computer will verify how painfully slow a computer becomes when infected by a virus. More tech savvy users will counter that an infected computer's speed depends upon the type of malware. To be honest, it does. However, based on my personal experience, I can say that while some malware are designed specifically for making computers slow and unresponsive, most malwares tend to decrease a computer's performance.

If your computer is infected, the first thing you need to do is deep scan your entire hard drive to remove all traces of the virus. Also, scan your secondary storage devices to make sure that they are clean as well. Additionally, make sure to follow best security practices to avoid getting infected in the future.


Remove unused and unnecessary programs


Now that we are sure that your computer is not slow because of a virus, you need to get rid of all the unnecessary programs that you have installed on your PC. To remove these programs, go to Programs in the Control Panel and uninstall your unnecessary programs one by one. If you are like most Windows users (including me) and are having a tough time figuring out which programs to uninstall as all of them seem important, follow this rule: If you have not used the program in the last month, it probably is unnecessary. It is better to uninstall that program given that you can reinstall it whenever required. It also is a good idea to remove all the useless software that came bundled with your computer. If you want, you can remove unused Windows features as well to further tone down your operating system.


Try faster alternatives to your everyday programs


If you use applications that require too much computing power to operate, you are better off replacing them with applications that do the same job as them but faster. Few resource hogging applications that you can replace are:-
1) Most resource intensive antivirus software can be replaced with the lightweight Microsoft Security Essentials.
2) Microsoft Office can be replaced with OpenOffice, an open source alternative that also has loads of amazing additions.
3) Adobe Reader can be replaced with the free Foxit Reader.
4) The newer versions of Internet Explorer are pretty fast. However, if you have been using an older version, it is time to upgrade IE or replace it with either Mozilla Firefox or Google Chrome. This will also give you faster internet speeds.


Remove unnecessary startup programs


Startup programs are the programs which start automatically each time a user logs on. Not only do they result in a slow startup, but they also run persistently, until you close them manually, continuously consuming valuable system resources (CPU and RAM) while they are running. So, disabling unnecessary startup items results in both a faster startup and a more responsive computer, as these applications not running continuously means more RAM and CPU will be available for the operations you perform on the computer.

To disable unnecessary startup programs, type msconfig in the search bar in Start menu (in Windows 7 and Windows Vista) and on the Start screen in Windows 8 and 8.1. On Windows XP, type this in the Run dialog box. This will start the System Configuration utility. Click on the Startup tab and disable all the applications that you think are not essential on your computer's startup. Restart your computer to see the changes. Keep in mind to not disable your security products as that will make your computer more susceptible to getting infected.


Restart your computer often


This is assuming that you continuously use your computer for long periods of time. Each time when you close a running program in Windows. it frees the memory that the program was occupying. However, it may so happen that some parts of the memory do not get freed which results in less system resources available to you to use which ultimately results in a slower PC. When you restart your computer, these occupied spaces in the memory get freed. Although, this memory issue has been somewhat fixed in recent versions of Windows, it still is a good idea to reboot your computer at least once a day.


Check your hard drive for errors


Over time, as you use your computer, chances are that some errors might creep in your hard disk which negatively affect your computer's performance. The best way to solve this issue is by using the inbuilt Disk Check utility available in all versions of Windows. To use it, execute chkdsk /r in the Command Prompt. Remember to open the Command Prompt as an administrator. It might prompt you to restart your computer. Execute Y to restart your PC. The chkdsk/ r command scans your computer's hard drive for errors and recovers readable data. Depending upon the size of your hard disk, this step might take some time. This step might increase your computer's performance phenomenally if there are a lot of errors on your hard drive.


Make sure you have enough free space


System speed is not only dependant upon CPU and RAM. If your hard drive is above 95% full, you will notice that your system hasn't been running at the fastest speed. This happens because Windows require empty space for swap files to increase in size and also as space for temporary files. It is imperative that the more cluttered and filled a hard drive is, the more difficult it is to read. To solve this issue, delete unnecessary data or move it to external storage devices.


Repair protected Windows system files


As you use your computer, it is possible that one or more system files get damaged or get corrupted which might effect your system's performance in a negative way. Thus, it is important to check that all your system files are original and behaving as they should. The best way to check your operating system's files is through the System File Checker. To run the System File Checker, open Command Prompt as an Administrator and execute sfc /scannow. This command will check all your system files and if it finds that some of them are modified or corrupt, it will replace them with the original. This step can take anywhere between 5 to 15 minutes but is one that you should perform especially if your system has ever been infected by a virus.


Disable unnecessary visual effects


The visual effects that make your computer look beautiful also slow it down considerably. So, if you want to get the best performance out of your computer, you should disable all these visual effects. To disable these visual effects:-
1) Press Windows Key+R to launch the Run dialog box.
2) Execute sysdm.cpl.
3) Go to the Advanced tab in the following Window and click on Settings in the Performance section.
4) Then encircle Adjust for best performance. If you want to use visual styles and themes, check it (located at the very end of the list).
5) Click on Apply to apply the changes.

Disabling these visual effects could lead to a considerable improvement in your system's performance especially if you are on Windows 7 or Windows Vista and using the Aero interface without a graphic card.


Do not run multiple antivirus programs


Make sure that no more than one antivirus program is running on your PC. An antivirus's resident protection takes a lot of resources. So, having more than one antivirus program would bring about a significant reduction in your computer's speed.


Disable sound schemes


Whenever you perform an action in Windows, a sound is played to indicate it. Although it leads to a better user experience, it also contributes towards slowing your PC down. To make your PC a lean work machine, you should disable these sounds. To disable these, open Sounds from the Control Panel or alternately type mmsys.cpl in the Run dialog box. Go to the Sound tab and select "No Sounds" from the Sounds scheme dropdown list and click Apply.


Update Windows and make sure that you are using the latest drivers for your hardware


Having all the updates ensures that your computer is running the best possible version of your operating system and your hardware is being utilized by the best possible code. Also, an updated operating system makes you more secure against future intrusions by performance reducing malware.


Use a Registry Cleaner to keep your Registry in good shape


The Windows Registry is a place which keeps information about all installed programs and active system files on your system. Over time, as you install and uninstall programs, the Registry can get filled with useless entries which might increase its size making it difficult to read. This happens because most uninstallers don't remove the program's Registry entries during an uninstall. Also, the larger the Registry is on your computer, the more time Windows will take to start.

To solve this issue, use any free Registry cleaner to remove useless entries. Depending upon the number of entries in your Registry and its size, you might see a significant increase in your computer's performance.


Delete Temporary Files


Temporary files are stored in your computer as Windows operates. They are files that contain your recently accessed files list, log files, your internet history, form history, cookies and temporary internet files. Over time, the number of these files increases and cleaning them becomes important. You can use CCleaner (mentioned above) to clean them or the inbuilt Windows Disk Cleanup utility by executing cleanmgr.exe in the Run dialog box. You can also schedule a disk cleanup to ensure that it happens automatically.


Disable Windows Search Indexing Service


The Windows search indexing service scans all the files and folders on your system and stores information about them in a database to make searches faster. Naturally, this results in consumption of resources. If you don't use Windows Search often or are willing to trade faster searches for a faster computer (as you should), disable the indexing service. To disable it, execute services.msc in the Run dialog box. In the work area on the right side, locate Windows Search service and double click on it. In the following Properties dialog box, select Disabled from the Startup type dropdown and click OK. Restart your computer. Your searches will be slow but your computer will be faster than ever.


Check Device Manager to look for hardware conflicts


Open Device Manager to see that all the connected hardware are functioning properly. If you find a hardware conflict, take the necessary steps to resolve it. If the conflict cannot be resolved, disconnect the problematic hardware until you find a solution.


Change to High Performance power scheme


If you are running your computer on a battery and notice that it is running slow, change the power scheme to high performance to increase system speed. Keep in mind that it will increase the amount of power consumed by your computer. To change the power scheme, open Power Options from the Control Panel. You can directly search for Power Options in Windows 7, Windows 8 and Windows 8.1 from the Start Screen/Menu.


Check if your computer is overheating


If your computer is overheating, then it is possible that it is causing your computer to run slowly. This is because most modern processors slow down when the computer is overheated to allow the computer to cool down.

To prevent your computer from overheating, make sure that the cooling fan works properly and that there is no dust clogging the air vents as it will prevent air flow which will result in poor cooling. Clean your computer's case with a light brush and place it somewhere where it can be effectively cooled by air. If you use a laptop, a cooling pad might be of help.


Defragment your hard drive


When Windows stores a file on your hard drive, it does not look for a single place to store your file as a whole. Instead, it stores the fragments of the file randomly, i.e storing them at whatever empty space it can find the quickest. Due to this, the fragments of a single file can be scattered all across a hard disk. A hard drive that has many files distributed like this is called as fragmented. Naturally, this results in slower file access times because Windows needs to find all these pieces and put them together (something like a jigsaw puzzle) before the file can be accessed.

This is what defragmentation corrects. When you defragment a hard drive, the scattered pieces of a file are put together and stored on the hard disk in continuous cells (assuming a hard disk to be made up of a large number of cells with each cell representing a particular storage space).

To defragment your hard drive, you can use the in-built Windows Disk Defragmenter utility. It can be searched on the Start Screen in Windows 8 & 8.1 and is located at Start>Programs>Accessories>System Tools in older versions of Windows.


Use ReadyBoost to increase the speed of your Windows computer


If you are running a computer that does not have enough RAM, using a flash drive with the ReadyBoost technique can and will give you significant improvement in speed. As with ReadyBoost, your flash drive becomes a cache that stores files that you might immediately require giving you faster access times than if those files had been stored on a hard disk.

Keep in mind that ReadyBoost depends upon the condition of your flash drive and was intended to increase speeds of devices which were short on RAM. If you already have a sufficient amount of RAM, chances are that you might see very little to no improvement in speed by using it.


Reinstall Windows


This is one of the more drastic methods and should only be used if all the methods mentioned above fail to bring any significant increase in your computer's speed.

If you haven't reinstalled Windows in a really long time, it is possible that because of constant use, the system has got bogged down with useless clutter in a way that no amount of tweaking will fix its condition. Then, reinstalling Windows is the only option.

Reinstalling Windows brings about a definite increase in speed but gives you a new PC without all your software and customization. Modifying it according to your needs will take a lot of time though but that is something you must sacrifice for a faster PC.

If you use Windows 8 or Windows 8.1, you can refresh your PC without affecting your installed apps and settings. To refresh your Windows 8 PC, open Update and Recovery by going to Change PC Settings from the Settings button that appears when you move your mouse pointer to the right side of your screen. Under it, click Recovery. Then under Refresh your PC without affecting files, click Get Started.


Upgrade to a solid state HDD


Although solid state hard drives are a lot faster for writing and reading data than older optical hard drives, their heavy price is something that keeps them out of the range of many. Still, if you do manage to get one for your PC, the change in speed will be immediately visible.


If all else fails, get more RAM


RAM or the Random Access Memory contains all files of the currently running programs that are immediately required by the computer. Accessing files from the RAM is much faster than doing the same from a hard disk. This means that more the RAM you have, more the programs you can run without compromising on speed. RAM upgrades do not cost much and are one of the best ways to speed up a slow computer.
How to Stop Your XP Computer From Hibernating (Shutting Down) How to Stop Your XP Computer From Hibernating (Shutting Down) In Windows XP, Hibernation mode is a powered-off state in which the contents of the RAM is dumped into a file at the root of the Windows dri...
How to Stop Your XP Computer From Hibernating (Shutting Down)

How to Stop Your XP Computer From Hibernating (Shutting Down)

In Windows XP, Hibernation mode is a powered-off state in which the contents of the RAM is dumped into a file at the root of the Windows drive (usually C). When this mode is selected, the contents of active memory are copied directly to a file, and immediately reloaded upon start up, letting you pick up directly where you left off, in most cases.

Stop Your XP Computer From Hibernating

Sometimes this causes undesirable operation, or if your computer is set to hibernate in the event of a low battery, applications can crash, causing valuable data to be lost. This article describes how to disable the hibernation feature altogether on your machine.

How to Stop Your XP Computer From Hibernating (Shutting Down)

Please note that you must be logged in as an Administrator and not a Limited Account in order to make this change.

1. Open your start menu.

2. Click on "All Programs".

3. Click on "Control Panel".

4. Click on "Power Options".

5. Click on "Hibernate".

6. Change settings to "Disable" Hibernate.

7. Click "Apply". You must do this to apply it--or it won't work!

8. Click "Ok" and that will stop the hibernating from occurring
  • You can always turn it back on, later,  if you like.
Tips
  • For saving some battery energy for a laptop, if you want to turn off only the monitor then you can set "Power Options" to do that, or
    • you may even turn off both the monitor and the hard drive after "different or the same" set lengths of time, but the CPU can remain awake.
Warnings
  • Do not do this to a computer that is not yours without asking the owner first.
How To Fix Render Blocking CSS In Above The Fold Content How To Fix Render Blocking CSS In Above The Fold Content Referencing CSS files with link[rel=stylesheet] will cause most browsers to delay page rendering while the stylesheet loads. This is desira...
How To Fix Render Blocking CSS In Above The Fold Content

How To Fix Render Blocking CSS In Above The Fold Content

Referencing CSS files with link[rel=stylesheet] will cause most browsers to delay page rendering while the stylesheet loads. This is desirable in many cases, but when loading stylesheets that are not critical to the initial rendering of a page, loadCSS (and upcoming web standards mentioned below) allows you to load stylesheets, so they don’t block page rendering.

render blocking CSS in above the fold content

How to identify render-blocking render-blocking JavaScript and CSS


You need to know what your page is loading. There are several ways to do this. I suggest you look at what your page is loading with our pagespeed tool to get an overview of the issues your page or theme faces. To get the specific files that are currently blocking rendering you should use the Google pagespeed insights tool. This tool will tell you the exact files that are blocking a particular page.

Also Read :-

How To Fix Render Blocking CSS In Above The Fold Content


Just simply add your External stylesheets (read those included via link tags) are render-blocking into a noscript tag.

Example:-

If Your Link
<link rel="stylesheet" type="text/css" href="https://maxcdn.bootstrapcdn.com/font-awesome/4.5.0/css/font-awesome.min.css"/>

Just use below code

Method 1 :-

<noscript id="deferred-styles">
    <link rel="stylesheet" type="text/css" href="https://maxcdn.bootstrapcdn.com/font-awesome/4.5.0/css/font-awesome.min.css"/>
</noscript>
    <script>
      var loadDeferredStyles = function() {
        var addStylesNode = document.getElementById("deferred-styles");
        var replacement = document.createElement("div");
        replacement.innerHTML = addStylesNode.textContent;
        document.body.appendChild(replacement)
        addStylesNode.parentElement.removeChild(addStylesNode);
      };
      var raf = requestAnimationFrame || mozRequestAnimationFrame ||
          webkitRequestAnimationFrame || msRequestAnimationFrame;
      if (raf) raf(function() { window.setTimeout(loadDeferredStyles, 0); });
      else window.addEventListener('load', loadDeferredStyles);
    </script>

Method 2 :-

<link as='style' href='https://maxcdn.bootstrapcdn.com/font-awesome/4.5.0/css/font-awesome.min.css' onload='this.rel=&#39;stylesheet&#39;' rel='preload'/>
<noscript><link href='https://maxcdn.bootstrapcdn.com/font-awesome/4.5.0/css/font-awesome.min.css' rel='stylesheet'/></noscript>

Method 3 :-

<script type='text/javascript'>
//<![CDATA[
function loadCSS(e, t, n) { "use strict"; var i = window.document.createElement("link"); var o = t || window.document.getElementsByTagName("script")[0]; i.rel = "stylesheet"; i.href = e; i.media = "only x"; o.parentNode.insertBefore(i, o); setTimeout(function () { i.media = n || "all" }) }
loadCSS("https://maxcdn.bootstrapcdn.com/font-awesome/4.5.0/css/font-awesome.min.css");
//]]>
</script>

So this was our guide on How To Fix Render Blocking CSS In Above The Fold Content, I hope the methods given above helped you.

Keywords:- load a CSS file asynchronously, Eliminate render-blocking CSS in above-the-fold content, Defer loading CSS.
How to Add Expires Browser Cache Control Header How to Add Expires Browser Cache Control Header Leverage Browser Caching helps to decrease Blog page load time. When you open or load any Blog or webpage from your local computer on any br...
How to Add Expires Browser Cache Control Header

How to Add Expires Browser Cache Control Header

Leverage Browser Caching helps to decrease Blog page load time. When you open or load any Blog or webpage from your local computer on any browser then that Blog or websites automatically sends request to the server, and it takes some time. And when you add Expires Browser Cache code in your Blogger template code then any body open or load your blog, Expires Browser Cache code save the server response file is user Browser Cache. I means no more request to your server and no more extra time to load your Blog page.

Leverage Browser Caching

Every blogs that includes many multimedia files such as images (jpg, gif, png and more), java script (.js), flash (.flv), stylesheets (.css) and more. When the blog's page loads on a computer these files also download as cache file to the local system via browser. It will be automatically re-fetch while you accessing the same page again. If the file is already stored with expire date, the file loaded via your local. Server request will not sent from blogger until it expires.

How To Add Expires Browser Cache Code in Blogger


1. Sign in to your Blogger Dashboard > Template > Edit HTML

2. Click anywhere in the code and press CTRL + F to open the search box then find the <head> tag.

3. Just after <head> tag paste the code given below:
<!-- Start leverage caching by HowlMeFlash -->
<include expiration='7d' path='**.css'/>
<include expiration='7d' path='**.js'/>
<include expiration='15d' path='**.html'/>
<include expiration='3d' path='**.gif'/>
<include expiration='3d' path='**.jpeg'/>
<include expiration='3d' path='**.jpg'/>
<include expiration='3d' path='**.png'/>
<!-- End leverage -->
4. Save your Template and you are Done!

How To Add Expires Browser Cache Code in WordPress

<!-- Start leverage caching by HowlMeFlash -->
<include expiration='7d' path='/assets/**.css'/>
<include expiration='7d' path='/assets/**.js'/>
<include expiration='15d' path='/assets/**.html'/>
<include expiration='3d' path='/assets/**.gif'/>
<include expiration='3d' path='/assets/**.jpeg'/>
<include expiration='3d' path='/assets/**.jpg'/>
<include expiration='3d' path='/assets/**.png'/>
<!-- End leverage -->

Note: Here "7d" shows the expiry date as 7 for the file. You can modify it whatever you want.

Don't set long expires date for blogger blog's file in leverage browser caching header. Since if you set long expire date then it will take some time for update the changes from your blog.
So this was our guide on How to Add Expires Browser Cache Control Header in Blogger Blog, I hope the methods given above helped you.

Keywords:- Add Expires Cache Control Header in Blogger Blog, enable leverage browser caching in blogger blog, Add Leverage Browser Cache to Your BlogSpot Blog, leverage browser caching of your website or blog.
StatCounter Web Analytics